HOW TO USE?

APPLICATION OF TIRE REPAIR KIT

1 Stick the speed limit warning label which you will find in the kit on a visible place while driving and do not exceed the speed limit.

2 Shake the bottle of tire reparing liquid. Open the bottle lid and use the back of the lid to open the aluminium foil.

3 Take the hose lid from the kit. Put the hose lid in the hole you have made on the aluminium foil and close firmly.

4 Connect the black compressor hose which you will find in the kit with the bottle lid and tighten.

5 Remove the valve cover on the tire . Connect the hose from the bottle to the tire valve.

6 Plug in the power cable behind the compressor to the 12 V car lighter inside the car.

7 Place the bottle in a straight position. Turn on the compressor. First of all, the system will transfer the sealant into the tire and subsequently inflate the tire by pumping air into it. During the selant transfer the pressure will increase to 300 Kpa and will suddenly decrease when the compressor starts to pump air into the tire.The pressure will start to increase as the tire is gradually inflated. During this operation some liquid may come out of the tire.This is normal.

8 Turn off the compressor when you reach 180 Kpa tire pressure.If you cannot reach the required pressure, it means that your tire is exceesively damaged and cannot be repaired with tire repair kit. In this case please call for road side assistance.

9 When the repair is completed, remove the hose connected to the valve.

10 Start driving without losing time. Drive for 10 minutes or 5 km, then pull over your car and check your tire pressure.In order to check the tire pressure, connect the compressor hose directly to tire valve. Plug in the power cable to the 12 V car lighter inside the car and operate the compressor for a few seconds.If the tire pressure is above 130 Kpa, inflate it until it reaches placard pressure.If the pressure is below 130 Kpa, it means that the tire is excessivley damaged and cannot be repaired with tire repair kit. In this case please call for authorized road side assistance.When you reached the required pressure, you can safely drive your car under 80 km speed limit and get your tire permanently repaired. Seal& Save offers you a safe driving distance of 200 km.

PROPER CONDITIONS TO USE SEAL&SAVE.

+ If the diamater of the puncture is max 6 mm + If the puncture is on the base of the tire not on the sidewalls Download PDF

IMPROPER CONDITIONS TO USE SEAL&SAVE

+ If the expiry date of the tire repair liquid has passed, it cannot be used.You can replace it with a new one. + If the puncture is not on the base but on the sidewalls of the tire. + If the puncture diameter is bigger than 6 mm. + If there is a problem on the contact area of the wheel rim and the tire + If the wheel rim or the valve are damaged + A bottle of tire repair liquid is only used for one tire.If more than one tire is damaged, it is not possible to repair it with one bootle of tire repair liquid.

ATTENTION!

+ Tire repair liquid is only suitable for the original tires of your car. Do not use it for other tire dimensions. + Do not remove the object which makes the puncture from your tire + Do not exceed 80 km speed limit after you repair your tire with Seal&Save. + Do not drive more than 200 km after you repair your tire with Seal&Save. + Read the using instructions carefully and apply all the steps respectively. Otherwise, you might be injured or have material damage. + Keep tire repair liquid out of reach of children + Tire Repair Liquid may cause allergic reactions as it consists of latex.Avoid the contact with your skin and eyes. Do not drink. Do not inhale the tire repair liquid for a long time. + Avoid continious use of the compressor for a long time. After 15 minutes of usage turn it off and let it cool. + Tire repair liquid is water based and can be cleaned through your tire before permanent repair. + Tire Repair liquid may lead to temporary disorder of tpms sensor. + Inform the authourized service which will repair your tire permanently that you have used tire repair kit to temporarily repair your tire. + For your safety do not forget to set your barking brake and turn on your hazard lights before you start reparing your tire. + If an extraordinary problem arises on the tire during the repairing operation, stop the operation and call for authourized road side assistance. + The black hose connecting to the tire may get warmer during repairing operation. Beware of that. + There is a tire pressure value advised for each tire and car model by the car manufacturers.You can reach this information on your door sill and user manual. Do not inflate your tire above the tire pressure values advised by your car manufacturer while using Seal&Save.